Showing posts with label how to. Show all posts
Showing posts with label how to. Show all posts

Friday, 5 October 2012

Beyond Stop, Drop and Roll
Tips for holding a fire safety drill



Your kids may know the basics when it comes to fire safety, but do they know what to do in case of an actual fire in the home? If the answer is somewhere between "not reallly..." and "ummm..." read on so you can have a successful fire safety drill with the family.
(Image via: iStock)

One fire drill doesn't cut it. Having regular fire drill and a solid evacuation plan allows your responses and behaviours to become automatic in case of an emergency. Most home fires start in the middle of the night and only allows minutes for evacuation while you and your family are tired, confused or scared.

It's important to make sure that during the drill proper fire safety awareness is part of the drill. Rather than just walking outside, practice real and different scenarios. Is the home filled with smoke? Teach the kids to crawl along the floor to safely escape and check door handles for heat before entering or exiting a room.

Tips For a Successful Fire Drill

  • Be consistent with your expectations and performance. Don't be relaxed with one drill, and strict with another.
  • Include people who visit the house regularly such as baby-sitters, neighbor's kids, extended family.
  • Fire drills are for holidays too. Once the turkey is brining or Christmas tree goes up, have a drill that takes the new decorations into consideration.
  • Have night time drills where family members must use flashlights to escape.
  • Have fun, but take all drills seriously. Insist that all family members who are present participate. 
  • Getting out of the house is only the first step. Your fire drill should include meeting up outside the house at a predesignated place, like a landmark or structure a safe distance from the house.
  • Practice fire drills where family members must escape from different rooms in the house including bedrooms, bathrooms, the kitchen and the living room.
  • Hold drills at all times of the day and night. Fire strikes anytime, so practice at all times.
  • If you have second-story windows, practice using a fire ladder. Deploy it and climb it.
  • Children in your family should know how to deploy fire ladders, use a fire extinguisher and how to call 911.
  • Appoint one person as "fire marshal." It's their job to trigger the alarm and time the exit, take turn being fire marshal so everyone knows how to take charge.
  • Time your drills. Knowing how fast people are getting out will help you improve your plan.
  • Keep records of every drill. In case of a fire, your insurance company will look favorably on this information.
  • Make everyone participate. This builds teamwork and helps family/employees learn to depend on each other.
  • Throw in unexpected blocks, like having a family member block an exit and shout, "I'm a fire! 
  • Go out another way!" or use a piece of cloth draped or pinned across an exit to represent fire or a blocked exit.
  • Talk about the fire drill afterward and critique it. What went right, what went wrong. What could you do better next time.

Wednesday, 3 October 2012

Home Fire Safety Checklist



As a home owner, it can be easy to install a couple smoke detectors and throw a fire extinguisher in the kitchen and say your prepared. The hard honest truth is homeowner's need to take a a more comprehensive approach to fire safety and preparedness. By checking a few areas around your house with this fire safety checklist, you can ensure your home is a little safer, and sleep a little easier.

(Image: iStock)


Garage

Oily rags are in air-tight containers and away from heat sources
Trash is not stored in the garage
No pull-down stair access to garage attic space is linked to the main house
Door leading from the garage to the house is solid, has a threshold to block fire from traveling to the house
Door leading to the house has weather stripping to prevent carbon monoxide fumes from passing through
Garage is clear of junk that can facilitate fire
Gasoline is stored away from ignition sources like heat, sparks, and flames and in containers with approved labels.

Basement

Ensure areas around heat-generating equipment such as a furnace, oil burner or wood stove, are clear of combustible materials, debris and rags
Water heater burner-access doors are closed to prevent flame roll-out
Breaker panel has not been recalled or recommended for replacement
Breaker wires are not loose
Wire insulators show no signs of erosion or decay
Arc-fault circuit interrupters (AFCIs) have been added for protection from electrical wiring faults, particularly in older homes. WARNING: If you’re not an electrician, call one. Don’t try to fix this yourself

Oily rags are in air-tight containers and away from heat sources
Trash is not stored in the basement.

Laundry Room

There is no lint build-up inside the dryer, exhaust duct, or behind the dryer
Foil or plastic accordion-type ducting material has been replaced with rigid or semi-rigid metal duct.

First Floor
Working smoke detector
Cooking surfaces are clean
Towels, curtains, plastic utensils, and pot holders are stored away from hot surfaces
Cookies and other kid-friendly snacks are stored away from the stove
Kitchen has a working fire extinguisher
Light bulbs meet the recommended wattage of each fixture
Incandescent lights are not exposed, do not have a shade closer than 12 inches, and are at least 12 inches from combustibles
Any furniture meets recommendations for fire-resistant upholstery
Fireplace has a screen, surrounding area is clear of debris, and flue is clear of obstructions
Chimney is cleaned annually
Chimney has fire-stop of gypsum board or fire-code gypsum board at each floor penetration
Metal vent areas around chimney are blocked by sheet metal
No electric cords run under carpets or are pressed against a wall
Extension cords and outlets are not overloaded (powering too many devices).
Second Floor

All mattresses were made after 1973
Each bedroom and hallway has a working smoke detector especially if you sleep with your doors closed
Closet lights are not exposed
Light bulbs meet the recommended wattage of each fixture
Incandescent lights are not exposed, do not have a shade closer than 12 inches, and are at least 12 inches away from combustibles
No electric cords run under carpets or are pressed against a wall or bed
Extension cords and outlets are not overloaded
Portable heaters or other heat-producing appliances are three feet from beds and other flammable materials, such as curtains
All bedrooms have an escape ladder that all members of the family know how to use
Electric blankets are UL-approved, with cords in solid condition
The floor has a working fire extinguisher.

Attic

There are no gaps around the chimney
There is at least a three-inch gap between insulation and lighting fixtures.

Wednesday, 12 September 2012

How To Plumb a Single to Double Bathroom Vanity



Switching from a single to a double bathroom sink sounds complicated but we promise you can actually do it yourself. Once you done the fun part of choosing your new sinks and vanity, it is just a matter of tying together 2 sinks into a one main drain, easy right? We believe in you!

(Image Via Houzz)

Shut off the water with the shut-off valves under the sink. Begin removing the existing vanity by loosening the caulk between the wall and the vanity with a utility knife. Carefully remove the vanity countertop so as not to damage the wall. Remove all the screws or nails that are holding the old vanity to the wall. Dispose or recycle your old vanity.

Turn off all water going to the house with the main shut-off valve. For additional safety, turn off the shut-off valves on top of your water heater. Find the lowest faucet in the house and drain the water. Once that is complete, you can remove the old bathroom vanity shut-off valves and dispose of them.

Put in new double-outlet valves. Do this by slotting the supply pipe into the valve, making sure to pass the nut and compression washer over the pipe. Tighten that with a wrench. Repeat this for the hot and cold lines.

Turn the main water supply back on and make sure not to forget the water heater valves. Check the new plumbing for leaks. If you find one, tighten the compression nut a bit more.

Before you install the new vanity top, install the faucet and drain assembly to it. Attach the flexible supply line and tighten the compression nuts to the threaded posts that are on the faucet. Put the faucet through the pre-drilled holes in the vanity top, tighten the nut included to keep it in place. Put in the drain assembly by applying plumber’s putty under the rim of the drain trim. Push it down through the top of the drain hole. Next, tighten the nut from underneath the vanity until putty oozes out on all sides. This seals the drain to prevent leaks. Scrape off excess putty.

Screw in the tailpiece that comes from the drain assembly to the drain pipe and tighten it. Put in the lift lever and the stopper by lining up the lift lever through the hole in the rear of the tailpiece. Place it into the hole in the stopper.

Install the new vanity, securing it to the wall studs. Check to make sure the top is level and that all valves are clear of any drawers or other obstacles in the vanity. Apply a bead of silicone along the top of the vanity cabinet and set the sink on top.

Connect the supply lines to the hot and cold shut-off valves. Tighten the compression nuts with a wrench. Hook up connect the new drain assembly to the old drain pipe. Use a t-connector and a new p-trap. Tighten. 

Turn your shut-off valves back on. Keep your eyes peeled for leaks. Turn on the faucet and check for any leaks from the drain line. Fill the sink up with water and allow it to all drain so that you can check for leaks under pressure. Once you're sure everything is fine apply caulk to the sides and back of the vanity top to secure it to the wall. Allow it dry for 24 hours.

Friday, 17 August 2012

Tune Up a Sliding Door


(Image: Houzz)

Exterior Sliders


Remove the door and inspect the track, be sure to have someone help you as the door will be quite heavy. To remove the door, slide the operating panel into the half open position. From inside lift the door up into the top track as far as possible. Tilt the door so the bottom goes outward and the top can be gently lowered. Place the removed door onto a saw horse.

Many exterior sliding doors collect dirt and debris so be sure to clean the tracks with a stiff bristle brush or sponge and some soap and water. Then clean and lubricate the rollers in the bottom of the door.

If the track is bent and rubbing against the door, tap out the bend using a block of wood and hammer. Reinstall your door panel. With the door nearly closed, look for a even space between the door and the jamb. Adjust if necessary.

If you need to adjust one side of the door up or down, locate the adjustment screws at the bottom of the door. Look for trim caps covering the screws, if there are some you will need to pry those out first. Turning the screws clockwise should raise the door; counter-clockwise should lower it, Start by giving each screw a quarter turn to check the action. Adjust the height as needed.

Interior Bypassing Closet Door


Turn on the closet light and close yourself inside the closet to see how the door meets the jamb. If the door meets the jamb but rubs the carpet, or if the door is too high and does not meet with the floor guides, raise or lower both sides equally.

Using a screwdriver turn the adjusting screws, typically located on the back of each roller bracket, until you've aligned the door with the jamb. Some cam-types adjust as you turn the screw. While some other types allow you to adjust after loosening the screw and setting it in place by retightening the screw.

Pocket Doors


The door brackets on the top of the door hook onto hanger bolts suspended from a pair of two or four wheel trolleys that ride in the track. The hanger bolts allow you to make adjustments. To access the hanger bolts, remove the stop and the split head jamb on one side of the door. This will either be quite tricky or easy, depending on how the door fastens together.
 
If you see screws, remove them. If you don't see any screws, carefully pry off the stop and look again for screws that may secure the split jamb to the frame of the pocket door. If the casing is nailed to the jamb, it shouldn't be. Pry the pieces apart enough to cut the nails with a hacksaw blade, or drive each nail through the casing with a nail set and hammer. 

Use an open-ended wrench to turn the hanger bolt and level the door. When you've properly adjusted the door, tighten the locknut, then reinstall the trim and touch up the paint as needed.

Friday, 10 August 2012

Repair & Replace Door Hardware



Whatever you’re reason for replacing hardware whether it be security, accessibility or for a new look, it’s important to use the right tools and the right hardware.

There are three hardware types for interior doors: privacy lock sets, passage latch sets, and dummy sets.

If you’re changing hardware for a bedroom or bathroom, opt for a privacy lockset with a simple push lock. If your door is a larger closet or a main room of the house like a living room or dining room opt for a passage latch set. If your door is a smaller closet or other room where the door does not latch, go for a dummy set.

(Image: Houzz)
  1. How To:
  1. Before you purchase your new door handle, measure your door. The standard door size is 1 3/8-inch thick, and modern door handles are designed to fit this size. Check your door’s thickness before you select your new hardware.
  2. Next, decide what type of door handle you’d like: a knob-type handle or a lever-type handle. Knob-type handles turn with a round knob, while lever-type handles look like a sideways “L.” You push down on the lever to open the door.

    When you purchase your hardware set, make sure your package contains: interior and exterior sides of the handle set, the latch, a strike plate that goes on the jamb of the door, installation screws and key (if you’re using a privacy lockset). These items will be listed on the package.
    1. Remove your old door hardware. To do this, look for two screws on the interior side of the handle (near the door). Take out the screws in the door edge and pull off the knob slowly.

       Remove the strike plate on the doorjamb. The strike plate is the metal plate affixed to a doorjamb with a hole or holes for the bolt of the door. Your doorjamb is the vertical part of the frame where the door is secured. Insert your latches into the faceplate holes and secure them with two screws.

      Now it's time to install the new hardware! Start by installing the faceplate. Make sure the plate fits flush with the door. If it doesn’t, use a hammer to lightly tap the faceplate until it sits flush.

      Next, insert the side of the handle set that fits through the middle of the latch. Then fit the exterior half of the doorknob over the interior half (it will fit snugly). and
  3. Secure the two halves together with the two screws that came with the knob. Tip: Install the first screw loosely and then insert the second screw. That way, you’ll be sure they line up properly. Once they’re both in, then you can tighten the screws with a screwdriver. Lastly, install the strike plate in the doorjamb with two screws for wood.

Wednesday, 8 August 2012

Batten Down the Hatches 
Repairing a Storm Door 



Does it take the force of 1,000 winds to close your storm door? If your door doesn't close or takes a firm tug to close, chances are it's grating against the frame and your nerves. When the metal frame on the hinge side of the door comes loose, or the moulding loosens, the door begins to sag and scrape against the opposite side of the frame.



(Image: Houzz)

Before you go running for your tools asses and determine where the issue is. Partly open the door and push the door up and down, keeping an eye on the hinge side of the frame. 

Re-Nail the Door Moulding

If the moulding moves, secure it with extra nails. Start by adding a couple of nails near the top of the wood trim. Then add nails further down if necessary. Sink the nailheads slightly with a nail set, cover the heads with acrylic caulk and touch up the moulding with paint. Position the door by wedging a shim between the door and the frame. Pre-drill and drive 10d galvanized finish nails to firmly fasten the moulding.

Add Additional Screws

If your wood trim is good it's more than likely your metal framing loosening. To fix the metal frame add a few No. 8 x 1-in. pan head screws. Stick a shim between the door and the frame, tighten the existing screws and drill new screw holes through the frame. Press lightly as you drill the metal; you don’t want to drill into the wood molding with the 3/16-in. bit. Then drill a 3/32-in. pilot hole into the wood and add screws. Usually two or three screws added near the top of the frame will work. For a neater look, spray-paint the screw heads first.

Wednesday, 1 August 2012

Keep Your Fans Happy



No we're not talking about your youtube fans and blog followers, we talking floor fans. During these hot summer days, your fans are in overdrive. While they are circulating that beautiful and welcome cool air around you they are also picking up loads of dust. Take a look, if your fan has some serious grunge this quick task will keep your home cool and your air cleaner.

Lasko Wind Machine Fan
(Image: Totem Building Supplies)

Turn off and unplug your fan. Never try to clean your fan while it is connected to a power source or running.

Remove the fans front grill by unscrewing it wit ha screwdriver. If your grill is not attached with screws it may be attached with clips. If you are uncertain on how to remove the grill consult your owner's manual.

If your fan has a blade cap, located at the centre of the fan blade, unscrew the blade cap until it is loose and pull it off.

Slide your fan blade off of the back grill. If you are unsure of how this is done on your particular model, consult your owner's manual. Optional: Remove the back grill. Some fans have a back grill nut that needs to be removed first. Consult your owner's manual if needed.

There should now be three pieces for you to clean. A front grill, fan blades and back grill. If there is quite a bit of dust build up, wipe the blades with a cloth to remove any large, easily removed debris before you rinse with water.

Fill a bucket with warm water and 1/2 teaspoon of dishwashing liquid. Using a rag wipe down all three parts of your fan. Be sure to rinse your rag frequently to prevent spreading dirt around. Warning: Be sure not to get any mechanical parts, such as the motor wet, as they can be damaged by water.

Once all dirt and debris has been removed, dry each part with a clean, dry rag. Place parts on a towel to dry completely before you reassemble the fan.

Wednesday, 25 July 2012

Organically Maintain your Lawn



Grass, it's great for kids and pets but maintaining it is less than green. Between chemical fertilizers and watering, a perfectly maintained grass lawn can be unnecessarily wasteful. By making just a few changes, you can make your lawn truly green.

Reasons to Green your Lawn
Cost: The more eco-friendly your maintenance is, the more green you'll have in your wallet. It's all about less: less water, less fertilizer, less pesticides and less equipment and that will always save you money.

Environment: With the right changes your lawn can actually give back to the environment by preventing soil erosion, filtering pollution from rainwater and absorbing air pollution.

Health: Less chemicals in and around your home is always good for your health. By eliminating chemical fertilizers, pesticides and weed killer.


How to Care for your Lawn
1. Start by mowing your lawn.
2. Next, aerate to punch air holes into the lawn. Aerating the soil once a year breaks through any thatch on your lawn. Aerating allows water and nutrients to get to the roots of the grass. To conserve energy, use a hand-powered lawn aerator.
3. Use a shovel to broadcast ½ to 1 inch of compost over the lawn.
4. Rake the compost into lawn using a garden rake.
5. Check the health of the soil with a test kit; for acidic soil, add pelletized limestone with a broadcast spreader.
6. Add chicken-manure fertilizer to the lawn with broadcast spreader.
7. Spread grass seed over the lawn using broadcast spreader.
8. Use the back of a leaf rake to work the grass seed into the lawn.
9. Lightly water the lawn two or three times per day.
10. Once grass germinates, return to normal watering: irrigate the lawn with no more than 1 inch of water per week.

More Ways to Green your Green
Find signs of over-watering: If you see any of these signs, be sure to cut down on the amount or frequency that you water your lawn. Check for runoff after watering your lawn. If your grass has a pale green or yellow tint. Moss or mushrooms growing around the area, as they can only grow in excessive moisture. 

Water Infrequently: Watering less often will make your grass toughen up and have the ability to withstand longer periods without water, and it will help keep the weeds out. When you don't water your grass as often, the roots are forced to go deep into the soil, while weeds and weedlings with short roots run out of water. Watering too often can also cause a buildup of thatch. 

The best time to water the grass is whenever it starts to curl. But be sure not to wait too long after that, since grass will start to curl right before it turns brown.

Water Early: A lot of the water evaporates before it hits the ground and wind can divert your sprinkler's spray away from the grass. It's best to water the lawn between 4 am and 9 am, when the air is cool and the wind is calmest.

Leave Clippings: Contrary to popular belief, grass clippings don't contribute to thatch because they are still mostly water and decompose quickly. The decomposing clippings recycle nutrients back into the soil, allowing you to use less fertilizer and less water. 

Compost: You can compost most of the yard waste around your lawn and add it as a top dressing for your lawn. After dropping about 1/3 inch of compost on the top of the turf, be sure to rake it off the grass blades and onto the soil. Water the grass so the microbes can be absorbed into the soil.

Invite Nature: Many birds are great replacements for insecticides. Providing a birdbath, bird feeder or birdhouse will attract all kinds of birds. Don't worry feeding the birds won't prevent them from eating the insects, since most birds have to eat both seeds and insects.

Mow Often: If your lawn has so many weeds that you can't possibly remove them all by hand, consider just mowing more often. For grass, the growing point is near the soil, but for most weeds, their sensitive growing point is near the top of the plant.

Grass Alternatives
Install Synthetic Grass: If your area has restrictions on water use, you may consider installing synthetic grass. After installed, it doesn’t use any energy, water, fertilizers, or pesticides.

Go for Native Plants: Native plants, being naturally adapted to survive without human intervention, require much less maintenance than the conventional lawn. They use less resources and save you time and money. Plus, they still provide the benefits of living plants to your local environment, such as helping prevent soil erosion, filtering pollution from rainwater, and absorbing pollution from the air.

Friday, 20 July 2012

How To Clean Your Garden Tools



When you think of maintaining your tools, your garden tools are probably not the first ones that come to mind. All tools, regardless of the job need a little maintenance to keep them working properly.

(Image: iStock)

Follow these steps to keep your tools in tip top shape, and prevent weeds and disease from spreading in your garden.

Remove Dirt: Wet soil can cause your tools to rust. Use a stiff bristle brush and water to clean your tools after every use. The brush will help remove any stubborn dirt from metal parts.

Dry your tools: Dry tools with a rag or let them air dry in the sun.

Remove rust: If you find rust spots, cover the area with a lubricating oil such as WD-40, and scrub it with a wire brush. Wear garden gloves to prevent rust from getting onto your skin to avoid irritation. If this method is not successful in removing the rust, use a paste of one part lemon juice and one part baking soda. Cover the rust spots with the paste and allow it ti sit for 10 minutes. The paste helps dissolve the rust, allowing you to easily wipe it away with a cloth.

Repair handles: Check wood handles for splinters, cracks and roughness. Smooth problem areas with a medium grit sandpaper or emery cloth. If the handles are extra rough try rubbing against the grain first.

Sharpen up: Sharpen dull blades on any tools used for cutting or digging. The more you use your tools, the duller they will become. Use a metal file to sharpen edges at a 45ยบ angle. Making long, smooth strokes in one direction. 

Oil tools: Blot lubricating oil onto a clean rag and rub a light coat of oil onto the surfaces of your tools. This will prevent wood from absorbing water or cracking, and protect metal parts from corroding. Fiberglass or composite does not need to be treated with oil.

Store: Keep your tools in a warm, dry place to prevent further corrosion. Avoid storing tools on the ground.